Showing posts with label Hopper. Show all posts
Showing posts with label Hopper. Show all posts

October 14, 2008

How to Prevent Formation of Iron Spots (Crater) in Refractory Bricks as a measure of Quality Control

What makes a refractory product sell? The factors determining the sales success are many and varied. They include market conditions, the nature of the product, and the image of the manufacturing organization in the market as well as of the product created by advertising, the socio-cultural background of customers, credit facilities, Customer Delight and so on.

But one major factor that appears certainly in all conditions (excluding monopoly or extreme scarcity) is product quality as perceived by the customer. The Production Department must accept its fundamental responsibility for the manufactured quality of its refractory products. The workforce with effective training and adequate equipment must be capable of -

· consistently producing to specification and

· recognizing and reacting when an operation goes out of control.

Adequate systems must be established to ensure that corrective action is taken. The quality control for Refractory Bricks refers to the following aspects:

· Manufacturing defects.

· Dimensional tolerances.

· Physical & Chemical material properties.

· Quantities, Marking, Labelling and Packing.

While Sampling for visual and dimensional inspection, iron spot (crater) is always an important criteria of inspection. It is not an uncommon site or if one had a chance of visiting brick yards of a few Refractory manufacturing units in this country then he must have noticed that bricks worth crores (millions) of rupees or thousands of tons lying rejected for not satisfying the customer specified criteria of iron spots (craters). Before going into the steps as how to control the formation of these iron spots in Refractory Bricks let us discuss some more about Craters.

Craters are defined as melt phenomena, caused by mainly iron oxide or lime or some other low temperature melting elements like, alkalies. An Iron spot on the surface of a refractory brick can be tested with a hammer (I assume Refractory persons would be acquainted with this tool :-) ) to determine the possible presence of crater which can be dangerous for the brick and so, for the furnace while in operation. The various reasons/sources of these iron spots and actions required to be taken to prevent their formation in a refractory brick are outlined below:

Refractory Raw Material

1. Preventive Measure: Checking the Raw Material & removing free iron from it before grinding / using. Sorting of Slag / Iron patch especially in calcined fire clay and other calcined raw materials at the kiln yard itself.

2. Responsibility: Mill house, Calcination Kiln, Checking & RM yard.

Own Rejection (Refractory Grog)

1. Preventive Measure: Iron containing (contaminated) grog to be kept separately.

2. Responsibility: Checking & RM yard.

Outside Grog

1. Preventive Measure: Visual inspection in the Truck by breaking up the lumps into pieces before unloading. Briquette test in the Laboratory.

2. Responsibility: Checking & RM yard. Laboratory (Quality Assurance).

Maintenance Waste

1. Preventive Measure: Cleaning of waste & scraps after Maintenance e.g. iron chips, welding tips etc. Handover to Production Deptt after maintenance of any Machine (Handover – Takeover system). Cleaning before & after maintenance of each machine (Mill House, Mixer, Press etc).

2. Responsibility: Concerned person of the Maintenance Deptt. Shift in charge of the concerned area (Mill House, Press, and Production).

Free iron in Mill House Silo Material

1. Actions Required: Due to Beater => regular cleaning of Magnetic drum, Plate & Roller Magnets. Due to Rusted plates => Silo cleaning once in a fortnight.

2. Responsibility: Mill House. Maintenance. Production departments.

Free iron from Press Hoppers

1. Actions Required: Due to Rusted plates => Hopper cleaning once in a fortnight.

2. Responsibility: Production.

These are the certain necessary steps which, if taken properly, can arrest the formation of craters and iron spots which become visible on the surface of the refractory bricks only when the firing is over that means everything is over!